Lenovo System x3950 X6, Руководство по планированию

Страница: 14 / 104

.
IMM2 Power Policies
As previously mentioned, the IMM2 code controls the x3850 X6 and x3950 X6 power
policy. The servers support three modes of redundancy based on the power supply
configuration, system load and the Power Policy configuration controlled by the
IMM2:
 Non-redundant
 Fully system redundant

Redundant with reduced performance (throttling)
When the server is booting, Power Maximizer runs in the background to verify the
available power in the system. If Power Maximizer determines the available power in
the system does not meet the systems power load based on the hardware installed,
and does not meet the Power Policy chosen in the IMM2, the system will not be
allowed to boot. Power Maximizer is discussed further in the following sections.
The below image is a screenshot of the IMM2 Server Power Management page where
you can change the servers power policies.
14