Lenovo Storage N3310, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 47 / 152

• Wakeup Settings : View and configure the wakeup timing and set the power state after a power failure.
• Miscellaneous Settings : View and configure some miscellaneous items, such as the NumLock key on
the keyboard and the boot status code.
System Security menu
You can set passwords and configure the TPM function on the System Security menu in the Setup Utility
program. For each menu item, press Enter to show selectable options and select a desired option by using
the up and down arrow keys or type desired values from the keyboard. Some items are displayed on the
menu only if the storage product supports the corresponding features.
Notes:
• Enabled means that the function is configured.
• Disabled means that the function is not configured.
The System Security menu contains the following items:
• Administrator Password : Set an administrator password to protect against unauthorized access to your
storage product. See “Using passwords” on page 34.
• User Password : Set a user password to protect against unauthorized access to your storage product.
See “Using passwords” on page 34.
• Secure Boot : Set secure boot parameters.
TSM Settings menu
You can view or change event log and BMC settings on the TSM Settings menu in the Setup Utility program.
On each submenu, press Enter to view the information or show selectable options and select a desired
option by using the up and down arrow keys. Some items are displayed on the menu only if the storage
product supports the corresponding features.
The TSM Settings menu contains the following submenus. For more information, enter the corresponding
submenu and refer to the instructions on the screen.
• TSM Network Settings : Set BMC management network configuration parameters.
• User Account Settings : Set BMC user account parameters.
Boot Manager menu
The Boot Manager menu in the Setup Utility program lists all the bootable devices installed in your storage
product and the listed items vary depending on your storage product configuration.
The Boot Sequence submenu in the Boot Manager menu provides an interface to help you view or change
the storage product startup options, including the startup sequence and boot priority for various devices.
Changes in the startup options take effect when the storage product restarts. The startup sequence specifies
the order in which the storage product checks devices to find a boot record. The storage product starts from
the first boot record that it finds. For example, you can define a startup sequence that checks a disc in the
optical drive, then checks the internal storage drive, and then checks a network device. For information about
setting the startup sequence or selecting a startup device, see “Selecting a startup device” on page 35.
Save & Exit menu
After you finish viewing or changing settings in the Setup Utility program, you can choose a desired
action from the
Save & Exit menu to save changes, discard changes, or load default values, and exit the
program. Press Enter to select the item on the Save & Exit menu, and then select Yes when prompted to
confirm the action. For information about exiting the Setup Utility program, see “Exiting the Setup Utility
program” on page 36.
Chapter 5
.
Configuring the storage product
33