Lenovo Storage N3310 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 152

Lenovo Storage N3310 Скачать руководство пользователя страница 19

Chapter 2. Storage product setup road map

This chapter provides a general road map to guide you through setting up your storage product.

The storage product setup procedure varies depending on the configuration of the storage product when
it was delivered. In some cases, the storage product is fully configured and you just need to connect the
storage product to the network and an ac power source, and then you can turn on the storage product. In
other cases, the storage product needs to have hardware features installed, requires hardware and firmware
configuration, and requires an operating system to be installed.

The general procedure for setting up your storage product is:

1. Unpack the storage product package. See “Storage product package” on page 7.

2. Install any required hardware or storage product option. See the related topics in Chapter 6 “Replacing

hardware” on page 41.

3. If necessary, install the storage product into a standard rack cabinet by using the rail kit shipped with

the storage product. See the

Rack Installation Instructions

that comes with the storage product.

4. Connect the Ethernet cable and power cords to the storage product. See “Rear view of the storage

product” on page 17 to locate the connectors.

5. Turn on the storage product to verify operation. See “Turning on the storage product” on page 29.

6. Review the Unified Extensible Firmware Interface (UEFI) settings and customize as needed. See “Using

the Setup Utility program” on page 31.

7. Configure RAID and install the operating system and basic drivers. See “Lenovo ThinkServer

Deployment Manager” on page 12 and “Configuring RAID” on page 38.

8. Install any additional drivers needed for added features. Refer to the instructions that come with the

hardware option.

9. Configure Ethernet settings in the operating system by referring to the operating system help. This

step is not required if the operating system was installed using the Lenovo ThinkServer Deployment
Manager program.

10. Check for firmware updates. See “Updating the firmware” on page 40.

11. Install management applications and any other applications. Refer to the documentation that comes

with the applications that you want to install.

© Copyright Lenovo 2015

5

«
...
17
18
19
20
21
...
»

Содержание Storage N3310

























































































































































Отзывы:

Нет отзывов