Lenovo ServeRAID M5110, Руководство пользователя

Страница: 34 / 72

Hardware Specifications 1-19
You can change system drives into unconfigured good drives (you can
also change unconfigured good drives intoto system drives). When a
system drive is changed to an unconfigured good drive, the unconfigured
good drive state of the drive is maintained after reboot, drive removal, or
drive insertion.
You can use system drives as bootable drives. iMR supports up to 63
system drives and up to 16 unconfigured good drives.
1.7 Hardware Specifications
You can install your ServeRAID M5110 controller in a computer with a
mainboard that has a PCI Express slot.
Table 1.3 describes the hardware
configuration features of the controller.
Table 1.3 ServeRAID M5110 SAS/SATA Controller Specifications
Specification ServeRAID M5110 SAS/SATA Controller
RAID Levels iMR mode: 0, 1, 5, 10, and 50
MR mode: 0, 1, 5, 6, 10, 50, and 60
Note: To use certain RAID levels with this controller, you
need to install a Feature on Demand (FoD)
upgrade and/or a transportable memory module
(TMM). See
Section 1.3.1, “Supported RAID Level
Upgrades” for information about these upgrades.
Devices Supported
per Port Up to 8 SAS devices or 8 SATA devices (such as drives
and expanders)
Ports Eight internal
Data Transfer Rate Up to 6 Gb/s per phy
Bus PCI Express 3.0
Cache Function No
1
. See the not at the bottom of this table.
Multiple Virtual Disks
per Controller Yes. Up to 64 virtual disks per controller.
Multiple Arrays per
Controller Yes. Up to 128 arrays per controller.
Online Capacity
Expansion Yes
Dedicated and Global
Hot Spares Yes
Hot Swap Devices
Supported Yes