Lenovo RackSwitch G8264CS, Справочник команд интерфейса командной строки

Страница: 485 / 702

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
485
Open Shortest Path First Configuration
The following table describes the OSPF commands.
Table 266.
OSPF Configuration Options
Command Syntax and Usage
router ospf
Enter Router OSPF configuration mode.
Command mode: Global configuration
area
<0 ‐ 5>
Configures OSPF area index. See page 486 to view command options.
Command mode: Router OSPF
area ­ range
<1 ‐ 16>
Configures summary routes for up to 16 IP addresses. See page 488 to view
command options.
Command mode: Router OSPF
area ­ virtual ­ link
<1 ‐ 3>
Configures the Virtual Links used to configure OSPF for a Virtual Link. See
page 491 to view command options.
Command mode: Router OSPF
default ­ information
<1 ‐ 16777214> <AS external metric type (1 ‐ 2)>
Sets one default route among multiple choices in an area.
Command mode: Router OSPF
no default ­ information
Removes the default route information.
Command mode: Router OSPF
[no] enable
Enables or disables OSPF on the G8264CS.
Command mode: Router OSPF
host
<1 ‐ 128>
Configures OSPF for the host routes. Up to 128 host routes can be configured.
Host routes are used for advertising network device IP addresses to external
networks to perform server load balancing within OSPF. It also makes Area
Border Route (ABR) load sharing and ABR failover possible.
See page 493 to view command options.
Command mode: Router OSPF
lsdb ­ limit
<LSDB limit (0 ‐ 16384, 0 for no limit)>
Sets the link state database limit.
Command mode: Router OSPF