Lenovo RackSwitch G8264, Справочник по командам

Страница: 535 / 794

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
535
Area Index Configuration
The following table describes the Area Index commands.
message ­ digest ­ key
<key ID (1 ‐ 255)>
md5 ­ key
<text string>
Assigns a string to MD5 authentication key.
Command mode: Router OSPF
no message ­ digest ­ key
<key ID (1 ‐ 255)>
Removes the MD5 authentication key.
Command mode: Router OSPF
redistribute {fixed|static|rip|ebgp|ibgp}
Configures OSPF route redistribution. See page 543 to view command options.
Command mode: Router OSPF
show ip ospf
Displays the current OSPF configuration settings.
Command mode: All
Table 280.
OSPF Configuration Options (continued)
Command Syntax and Usage
Table 281.
Area Index Configuration Options
Command Syntax and Usage
area
<0 ‐ 19>
area ­ id
<IP address>
Defines the IP address of the OSPF area number.
Command mode: Router OSPF
area
<0 ‐ 19>
authentication ­ type {password|md5}
Sets the authentication type.

password
authenticates simple passwords so that only trusted routing
devices can participate.

md5
is used when MD5 cryptographic authentication is required.
Command mode: Router OSPF
no area
<0 ‐ 19>
authentication ­ type
Removes the authentification type.
Command mode: Router OSPF
[no] area
<0 ‐ 19>
enable
Enables or disables the OSPF area.
Command mode: Router OSPF