Lenovo PB1-750M Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 74

Lenovo PB1-750M Скачать руководство пользователя страница 26

Lenovo PHAB Hardware Maintenance Manual

22

Checking the internal battery status

To check the battery status of the tablet, do either of the following:

• Approximate information about the battery status

Get the approximate status of the battery at any time by checking the battery
status icon on the system bar in the upper-right corner of the screen. The
shorter the green bar is, the less the battery power remains.

• Accurate information about the battery status

To get the accurate information about the battery status of the tablet, do the
following:

1.

Open the Android Settings screen.

To open the Android Settings screen, do either of the following:

– From the main Home screen, touch the Android Settings icon on

Lenovo Launch Zone. The Android Settings screen is displayed.

– Pull down the application icon from the action bar and then touch

Settings. The Android Settings screen is displayed.

2.

Touch Battery in the Device section on the Android Settings screen.

3.

The accurate percentage of the remaining battery power is shown on the
screen.

«
...
24
25
26
27
28
...
»

Содержание PB1-750M











































































Отзывы:

Нет отзывов