background image

 

14 

 

Screen image is not centered or 
sized properly.

 

*Adjust pixel frequency (CLOCK) and 

FOCUS or press hot-key (AUTO) 

 

Picture has color defects  
(white does not look white) 

*Adjust RGB color or select color 

temperature 

Poor brightness or contrast 

*When the brightness of the screen 

lowers after being used for a certain 
period and the function of the display 
is affected, send it to our authorized 
service center for repair. 

Horizontal or vertical disturbancies 
on the screen 

*Use win 95/98/2000/ME /XP shut-

down mode Adjust CLOCK and 
FOCUS or perform hot- key (AUTO-
key). 

 
CLOCK (pixel frequency) controls the number of pixels scanned by one 
horizontal sweep. If the frequency is not correct, the screen shows vertical 
stripes and the picture has not correct width. 
 
FOCUS adjust the phase of the pixel clock signal. With a wrong phase 
adjustment the picture has horizontal disturbances in light picture. 
 
For FOCUS and CLOCK adjustment use “dot-pattern” or win 
95/98/2000/ME/XP shut-down mode pattern. 
 

NOTES 

 
It is not recommended to rotate the monitor when executing the following 
operations.  

 

  Display of vedio documents.  

  Execute real-time 3D procedures.  

  Execute full-screen game operation.  

Содержание LXB-L15C




















Отзывы: