3 - 3
3
For Windows NT
®
4.0 users
Windows NT
®
4.0 users can send print job using Lenovo Peer-to-Peer Print software provided on the Lenovo
CD-ROM supplied with the printer.
Installing the TCP/IP protocol
If you did not install the TCP/IP protocol during the installation of your Windows NT
®
4.0 system (either
workstation or server) follow these steps. If you have already installed the TCP/IP protocol, proceed to the
next section,
Installing the Lenovo Peer-to-Peer software
1
Go to the
Start
button, select
Settings
, and then
Control Panel
.
2
Run the
Network
applet by double clicking the
Network
icon and then click the
Protocols
tab.
3
Select
Add
, and double click the
TCP/IP Protocol
.
4
Insert the requested disk(s), or CD-ROM, to copy the required files.
5
Click the
Close
button. The Windows NT
®
4.0 system will review protocol bindings and then you will see
the
TCP/IP Properties
dialog.
6
Configure the host IP address, subnet mask, and gateway address in that dialog. Consult your system
manager for these addresses.
7
Click
OK
to exit (your Windows NT
®
4.0 workstation or server will need to be re-booted).
Installing the Lenovo Peer-to-Peer software
1
Start the CD-ROM installation menu program according to the printer Quick Setup Guide.
2
Select
Install Software
.
3
Select the
Network Print Software
installation program.
4
Click
Next
in response to the Welcome message. Follow the on-screen instructions.
5
Select the
Lenovo Peer-to-Peer Print (LPR)
button.
6
Select the desired directory to install the
Lenovo Peer-to-Peer Print (LPR)
files and click
Next
. The
installation program will create the directory for you if it does not already exist on your disk.
7
Enter the Port name that you wish to use and click
OK
. The default port name is BLP1. Whichever name
you choose, it must be unique and it MUST begin with BLP.
