Lenovo Legion BoostStation, Руководство пользователя

Страница: 11 / 38

Chapter 2. Set up the dock
Install the dock
Use the accompanying power cord, and Thunderbolt
TM
3 cable to install the dock. The dock supplies power
to the computer when the dock is connected to ac power and your computer.
Notes:
• If the computer supports DGPU, you will need to change DGPU mode to IGPU mode to use this dock.
• Notebooks that cannot be set in UMA mode are not suitable for use with this dock.
Update the dock driver and firmware
Note: This is an optional operation.
The dock driver is preinstalled on compatible Lenovo computers and the firmware is embedded into the
dock. The dock is ready for use after you connect it to your computer.
Lenovo recommends that you update the dock driver and firmware whenever a later version is available.
You also can download the latest dock driver and firmware from
https://support.lenovo.com/
accessories/docks
.
Removing the dock from your computer
Note: Removing the dock when some programs are running with the dock graphics card might cause
program data loss or the program to stop responding.
To remove the dock from your computer, do the following:
1. Check and close the programs that are using the graphics card.
© Copyright Lenovo 2020
7