44
Lenovo IdeaTab A2109A-F Hardware Maintenance Manual
1100 Touch panel and LCD panel
For access, remove these FRUs in order:
•
“1010 Rear cover” on page 27
•
“1020 Battery pack” on page 30
•
“1030 System board” on page 32
•
“1040 IO board ” on page 35
•
“1050 Digital board” on page 37
•
“1060 Speakers” on page 39
•
“1070 Internal antenna” on page 40
•
“1080 Volume button bracket” on page 41
•
“1090 Integrated camera” on page 42
Figure 10. Removal steps of touch panel and LCD panel
Use a heater or dryers to heat up the bezel of the touch panel for 1 minute,
Make a small gap in the location of the power button, then insert a plastic plate
tool
1
and gently disassemble the touch panel by the tool.
1
Note:
Do not insert to deep when disassemble the side with touchpad FPC.
•
Otherwise, it might cause a damage to the FPC.
The volume button should remain to the last disassembly step to avoid
•
cracking that button during the operation
