Lenovo IdeaPad Miix 10, Руководство пользователя

Страница: 45 / 84

Values: Disabled , Enabled
Descriptions: When this option is enabled, a password prompt is displayed when you restart the
computer. To prevent unauthorized access, set the user authentication on the operating system.
• Password at Boot Device List
Values: Disabled , Enabled
Descriptions: If you enable this option, the supervisor password is required when you try to enter the Boot
menu by repeatedly pressing F12. To use this function, a supervisor password must be set.
• Password Count Exceeded Error
Values: Disabled, Enabled
Descriptions: Enable this option to display the POST 0199 error message and prompt for the Security
password.
• Set Minimum Length
Values: Disabled , x characters (4 ≤ x ≤ 12)
Descriptions: Specify a minimum length for power-on passwords and hard disk passwords. If a supervisor
password is set, you cannot change the minimum length until you log in as a supervisor.
• Power-On Password
Values: Disabled , Enabled
Descriptions: Set a power-on password to protect the computer from unauthorized access.
Security Chip
• Security Chip Type
Values: TPM 2.0
Descriptions: You can use a discrete TPM chip with TPM 2.0 mode.
• Security Chip
Values: Enabled , Disabled
Descriptions: Enable or disable the security chip.
• Security Reporting Options
– SMBIOS Reporting
Values: Enabled , Disabled
Descriptions: When enabled, changes to corresponding UEFI BIOS data are logged in a location,
(PCR1, defined in the TCG standards), which other authorized programs can monitor, read and analyze.
• Clear Security Chip
Descriptions: Use this option to clear the encryption key. It will not be possible to access already-
encrypted data after these keys are cleared.
• Physical Presence for Clear
Values: Disabled , Enabled
Descriptions: If this option is enabled, a confirmation message is displayed when you clear the security
chip.
UEFI BIOS Update Option
• Flash BIOS Updating by End-Users
Values: Disabled, Enabled
Descriptions: When this option is enabled, all users can update the UEFI BIOS. If you disable this option,
the supervisor password will be required to update the UEFI BIOS.
Chapter 5
.
Advanced configuration
31