25
Related service information
Power management
Note:
Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and hibernation.
Screen blank state
If the time set on the “Turn off monitor” timer in the operating system expires,
the LCD backlight turns off. To end screen blank state and resume normal
operation, press
any key on the keyboard or press the power button
.
Putting the computer to sleep or shutting it down
When you have finished working with your computer, you can put it to sleep or
shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer
to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the power button.
• Select the
Start button
, then select
Power
→
Sleep.
Note:
Put your computer to sleep before you move it. Moving your computer
while the hard disk drive is spinning can damage the hard disk, causing
loss of data.
To wake up the computer, do one of the following:
• Press any key on the keyboard.
• Press the power button.
