1
Unpacking
2
Connecting the keyboard and mouse
3
Connecting the Ethernet cable
Computer
Keyboard*
Mouse* Power cord
Xbox
controller*
Publications
* Selected models only.
NOTE:
Some models may contain items not listed here.
5
Connecting the monitor
6
Connecting the power cable
4
Choosing the right voltage
7
Turning on the computer
Selected models are equipped with a voltage selection switch. You can find it
at the rear of your computer. Models without a voltage selection switch control
voltage automatically.
If the electricity supply range is 100-127 V AC, set the switch to 115 V.
If the electricity supply range is 200-240 V AC, set the switch to 230 V.
Top/Bottom view of the computer
1
Selected models only.
ATTENTION:
Do not insert 3-inch discs into the optical drive.
NOTE:
If your model has two VGA monitor connectors, be sure to use the
connector on the graphics adapter.
USB 3.0 connector/USB power
off charging connector
1
Headphone connector
Microphone connector
USB 3.0 connector
Power button
Xbox pairing button
Rear view of the computer
Using Xbox
1
Selected models only.
NOTE:
Xbox is available only for some countries or regions.
1. Connecting Xbox controller to your computer via Micro USB cable.
2. Connecting Xbox controller to your computer via built-in dongle.
NOTE:
1. Press and hold the Nexus button for 1 second to activate the Xbox
controller.
2. The Nexus button will stay lit when connected.
PCI Express X 16 adapter
Wi-Fi antenna
1
Audio connectors
Ethernet connector
USB 3.0 connectors (4)
VGA connector
DVI connector
HDMI connector
Power connector
PS II connector
USB 2.0 connectors (2)
Connecting to the Internet
You need a contract with an Internet Service Provider (ISP) and some hardware
in order to connect to the Internet. ISPs and the services they offer vary by
country. Contact your ISP for services available in your country. Your computer
supports wireless (selected models only) or wired networks that connect your
computer to other devices.
Wired network connection
For wired networks, connect one end of an Ethernet cable (purchased
separately) to the Ethernet connector on your computer, and then connect the
other end to the network router or broadband modem. Consult your ISP for
detailed setup instructions.
NOTE:
Broadband modem and router installation procedures vary
depending on the manufacturer. Follow the manufacturer’s instructions.
Wireless network connection
For wireless networks, you can use the built-in Wi-Fi antenna to access your
wireless home network.
To connect your computer to the wireless network:
Click or tap the network icon on the taskbar, then select the name of your
router. Click or tap
Connect
, then follow the steps on the screen.
Test the wireless network by opening your Web browser and accessing any
Web site.
Press and hold the pairing buttons from both the controller and
computer for 3 seconds.
