Lenovo ideaCentre H500s Скачать руководство пользователя | Manualshive

Страница: 48 / 51

background image

Step 7.

Remove the hard disk drive. Refer to “Replacing the hard disk drive”.

Step 8.

Remove the power supply. Refer to “Replacing the power supply”.

Step 9.

Disconnect the data cables from the connectors on motherboard.

Step 10. Remove the screw that secures the front USB/card reader/audio module to the chassis.

Step 11. Slide out the front USB/card reader/audio module out of chassis.

Step 12. Install the new front USB/card reader/audio module:

a.

Slide the front USB/card reader/audio module in and secure it with screw.

b.

Connect the data cables to the motherboard.

c.

Reattach the power supply, hard disk drive and optical drive.

Step 13. Reattach the front bezel, computer cover.

Replacing the motherboard

Note:

For this procedure, it helps to lay the computer flat.

To replace the motherboard:

Step 1.

Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.

Step 4.

Remove the computer cover. Refer to “Removing the computer cover”.

Step 5.

Remove the front bezel. Refer to “Removing the front bezel”.

Step 6.

Remove the memory module. Refer to “Replacing a memory module”.

Step 7.

Remove the optical drive. Refer to “Replacing the optical drive”.

Step 8.

Remove the hard disk drive. Refer to “Replacing the hard disk drive”.

Step 9.

Remove the microprocessor fan. Refer to “Replacing the microprocessor fan”.

Step 10. Remove the heat-sink. Refer to “Replacing the heat-sink”.

Step 11. Remove the graphic card. Refer to “Replacing the graphic card”.

Step 12. Remove the TV-Tuner card. Refer to “Replacing the TV-Tuner card”.

42

Lenovo H500sHardware Maintenance Manual

«
...
46
47
48
49
50
...
»

Содержание ideaCentre H500s




















































Отзывы:

Нет отзывов

Похожие инструкции для ideaCentre H500s

6868 - IntelliStation M - Pro

Бренд: IBM Страницы: 188

Бренд: Digital Equipment Страницы: 321

Бренд: Gateway Страницы: 346

Бренд: Morrow Страницы: 162

Бренд: Zotac Страницы: 57

Бренд: 7starlake Страницы: 31

GX520 - OptiPlex - 512 MB RAM

Бренд: Dell Страницы: 266

Бренд: Dell Страницы: 74

VAIO PCV-RX480DS

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 2

VAIO PCV-RX470DS

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 3

Бренд: Sony Страницы: 45

Бренд: Sony Страницы: 57

Бренд: Sony Страницы: 61

Бренд: Sony Страницы: 50

Бренд: Sony Страницы: 40

Бренд: Sony Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды