Step 10. Remove the plastic rubber that protects the camera.
Step 11. Remove the two screws that secure camera to the front bezel.
1
Step 12. Lift up the camera
2
and disconnect the data cable from the camera.
3
Step 13. To install the new camera:
a.
Connect the data cable to the new camera.
b.
Line up the holes in the new camera with the mounting holes on the front bezel and secure it
with the two screws.
c.
Reattach the plastic rubber to the new camera.
Step 14. Reattach the middle cover, optical drive, stand holder, foot cover and stand base.
Replacing the LED panel
Note:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the LED panel:
Step 1.
Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
44
Lenovo C360–365 NT All-In-One ComputerHardware Maintenance Manual
Содержание ideaCentre C360
