Lenovo ideacentre 200 Скачать руководство пользователя страница 15

Страница: 15 / 140

Grounding requirements

Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by
a certified electrician.

Safety notices (multi-lingual translations)

The caution and danger safety notices in this section are provided in the following
languages:

• English

• Arabic

• Brazilian/Portuguese

• Chinese (simplified)

• Chinese (traditional)

• French

• German

• Hebrew

• Italian

• Korean

• Spanish

DANGER

Electrical current from power, telephone and communication cables is hazardous.

To avoid a shock hazard:

•

Do not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical storm.

•

Connect all power cords to a properly wired and grounded electrical
outlet.

•

Connect to properly wired outlets any equipment that will be attached
to this product.

•

When possible, use one hand only to connect or disconnect signal cables.

•

Never turn on any equipment when there is evidence of fire, water, or
structural damage.

Chapter 1. Read this first: Important safety information

Содержание ideacentre 200












































































































































Результаты поиска

Содержание ideacentre 200

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ideacentre 200, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ideacentre 200

Отзывы:

Бренды по названию

Популярные бренды