1. Push the top pen button on a select flat surface until you hear a click.
2. The pen will capture the color information of the surface and then send the information to
ColorKing software through Bluetooth.
3. Check the color information on ColorKing.
4. Use the color on other graphics software through ColorKing. For more information, please follow
the instructions in the graphics software.
Note:
Depending on the software, selected software may not support this function.
Note: The Lenovo Pen settings or the ColorKing software may be pre-installed on your computer. To open
them, enter the software name in Windows Search and select the matched result. If software is not pre-
installed, you can download and install the latest drivers from https://support.lenovo.com.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the
equipment.
FCC Statement:
"T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. T hese limits are designed to provide reasonable protection against harmful interference in a residential installation. T his
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be det ermined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/T V technician for help."
IC statement:
T his device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux a ppareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appare il doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
T his equipment complies with FCC and Industry Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements FCC and Industry Can ada limites établies pour un environnement non
contrôlé.
