Lenovo DU, Руководство пользователя

Страница: 133 / 226

6. Loosen the screw that secures the AnyFabric adapter. Pull the AnyFabric adapter to the rear of the server
to disconnect it from the system board. Then, remove the AnyFabric adapter from the rear of the server.
Note: Carefully handle the AnyFabric adapter by its edges.
Figure 92. Removing the AnyFabric adapter
7. If you are instructed to return the old AnyFabric adapter, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 183.
Installing or replacing a hot-swap redundant power supply
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
The hot-swap redundant power supplies help you avoid significant interruption to the operation of the
system when a power supply fails. You can install or replace a power supply without turning off the server.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Chapter 6
.
Replacing hardware
119