Lenovo B475e Скачать руководство пользователя страница 73

Страница: 73 / 98

Applying labels to the base cover

The new base cover FRU is shipped with a kit containing labels of several kinds.

If the Windows Certificate of Authentication label (COA)

is attached to a part that is replaced, return the

old part with the label attached to the customer, or provide a letter to the customer stating what the label
was originally on the system and what the label part number, serial number, and product key were.

The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.

COA label

PRC/MTM label or KCC label

Wistron label

PPT label

Brazil WLAN label, WLAN label for US/CA/TW, or Isreal

label for WLAN

China Telecome IMEI label

Brazil WLAN label, WLAN label for US/CA/TW, or Isreal

label for WLAN

China Mobile IMEI label

Brazil Bluetooth label or Bluetooth label for US/CA/TW

WWAN IMEI barcode label

Malaysia SIRIM label PPT label

Vodafone label

Indonesia WLAN and Bluetooth label

Rating label

Indonesia D side label

For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels,
apply both to the new base cover.

For the location of each label, refer to the following figure:

2010 LCD front bezel

For access, remove these FRUs in order:

Chapter 7

Removing and replacing a FRU

Содержание B475e



































































































Результаты поиска

Содержание B475e

Отзывы:

Lenovo B475e, Руководство по техническому обслуживанию аппаратной части, Страница: 73 / 98

Результаты поиска

Содержание B475e

Отзывы: