Lenovo AIO V540-24IWL Скачать руководство пользователя страница 76

Страница: 76 / 96

Heat sink

Prerequisite

Before you start, read Chapter 2 “Important safety information” on page 27 and print the following
instructions.

Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.

Replacement procedure

1. Remove the computer stand. See “Computer stand” on page 57.

2. Remove the computer cover. See “Computer cover” on page 59.

3. Remove the internal speakers. See “Internal speakers” on page 61.

4. Remove the VESA mount bracket. See “VESA mount bracket” on page 62.

5. Remove the system board shield. See “System board shield and system fan” on page 63.

6. Remove the heat sink.

Notes:

• Carefully loosen the screws from the system board to avoid any possible damage to the system

board. The screws cannot be removed from the heat sink.

• You might have to gently twist the heat sink to free it from the system board.

• Do not touch the thermal grease while handling the heat sink.

Hardware Maintenance Manual

Содержание AIO V540-24IWL

































































































Результаты поиска

Содержание AIO V540-24IWL

Отзывы:

Lenovo AIO V540-24IWL, Руководство по техническому обслуживанию аппаратной части, Страница: 76 / 96

Результаты поиска

Содержание AIO V540-24IWL

Отзывы: