Lenovo 7D31, Руководство по обслуживанию, Страница: 161 / 274

Figure 68. Removing a memory module
Open the retaining clip on each end of the memory module slot.
Grasp the memory module at both ends, and gently lift and remove it from the slot.
After this task is completed
1. Install a replacement unit (see “Install a memory module” on page 153).
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a memory module
Follow instructions in this section to install a memory module.
About this task
“
ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 110
Attention:
Memory modules are sensitive to static discharge and require special handling. In addition to the
standard guidelines for “Handling static-sensitive devices” on page 110:
• Always wear an electrostatic-discharge strap when removing or installing memory modules. Electrostatic-
discharge gloves can also be used.
• Never hold two or more memory modules together so that they touch. Do not stack memory modules
directly on top of each other during storage.
• Never touch the gold memory module connector contacts or allow these contacts to touch the outside of
the memory-module connector housing.
• Handle memory modules with care: never bend, twist, or drop a memory module.
Chapter 4
.
Hardware replacement procedures
153