Lenovo 7D2C Скачать руководство пользователя страница 13

Страница: 13 / 72

Chapter 2. Specifications

See this section for information about ThinkSystem Micro DataCenter 6U 1200mm Deep Rack Cabinet.

Dimension and weight

Dimension

• Length: 1200 mm (47.24 inch)
• Width:

– Without the wheeled tray: 345 mm (13.58 inch)
– With the wheeled tray: 512.5 mm (20.18 inch)

• Height: 687 mm (27.05 inch)

Weight

• Without the wheeled tray: 64.4 kg (142 lbs)

• With the wheeled tray: 74 kg (163.1 lbs)

Supported servers

See this section for information about the servers that are supported by the rack cabinet.

This rack cabinet supports the following servers:

• SR250: up to four units with Toolless Friction Rail v2

See

https://thinksystem.lenovofiles.com/help/topic/7Y51/pdf_files.html

for more information.

• SE350 E1 Enclosure (1U 2-node): up to four units of E1 enclosures with Toolless Friction Rail v2

See

https://thinksystem.lenovofiles.com/help/topic/SE350/pdf_files.html

for more information.

Note:

This rack cabinet does not support SE350 E2 Enclosure (2U 2-node). See

https://

thinksystem.lenovofiles.com/help/topic/SE350/server_specifications.html

for details about SE350

configurations.

• SR670: up to two units with vertical mounting kit

Содержание 7D2C









































































Результаты поиска

Содержание 7D2C

Отзывы:

Похожие инструкции для 7D2C

Бренды по названию

Популярные бренды

Lenovo 7D2C, Руководство пользователя

Результаты поиска

Содержание 7D2C

Отзывы:

Похожие инструкции для 7D2C

Бренды по названию

Популярные бренды