Lenovo 70AR Скачать руководство пользователя страница 22

Страница: 22 / 200

Microprocessor

One or two Intel

Xeon

microprocessors (internal cache size varies by model)

For a list of the ThinkServer microprocessor options, go to:
http://www.lenovo.com/thinkserver

Memory

Your server has 20 memory slots. For more information, see “Memory module installation rules” on page 77.

Power supply

One or two 800-watt hot-swap redundant power supplies (Universal input and compliant with 80 PLUS Gold)

One or two 550-watt hot-swap redundant power supplies (Universal input and compliant with 80 PLUS Gold)

System fans

Your server comes with eight system fans to provide proper system cooling and airflow.

Internal drives

Internal drives are devices that your server uses to read and store data. The internal drives supported
by your server vary by model.

• Hard disk drive

– Up to four 3.5-inch hot-swap Serial Advanced Technology Attachment (SATA) hard disk drives, Serial

Attached SCSI (SAS) hard disk drives (SCSI is the acronym for Small Computer System Interface), or
solid-state drives

– Up to eight 2.5-inch hot-swap SATA hard disk drives, SAS hard disk drives, or solid-state drives

– Support PCI Express solid-state drives

The following server models also are available:

– Server models without hard disk drives or solid-state drives

– Server models without hard disk drives, solid-state drives, backplanes, RAID cards, and related cables

• Optical drive

– One slim SATA optical drive in some models

For the location information about the internal drives or drive bays, see “Server components” on page 26.

External drives

If your server has a Host Bus Adapter installed, an external tape drive can be connected to store data on
tapes. To connect an external tape drive, see “Connecting an external tape drive” on page 133.

Expansion slots

• Two riser card assembly slots on the system board

• One PCI Express card slot on the riser card assembly 1

• One PCI Express card slot on the riser card assembly 2

For detailed information, see “Rear view of the server” on page 23.

ThinkServer RD540 User Guide and Hardware Maintenance Manual

Содержание 70AR









































































































































































































Результаты поиска

Содержание 70AR

Отзывы:

Бренды по названию

Популярные бренды

Lenovo 70AR, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание 70AR

Отзывы:

Бренды по названию

Популярные бренды