Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor.
(In
the lower left position)
Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note:
Be sure to read the Safety information on page i
ii
before carrying out this procedure.
1.
Power off your computer and all attached devices, and unplug the computer power cord.
2.
Connect the DP cable to the DP connector of the monitor and the other end on the
back of the computer.
DP
DP
Chapter 1 .
1-3
Downloaded from www.vandenborre.be
