5. Connect the audio cable to the audio jack of the monitor and the other end on the
back of the computer.
6. Insert the power cord into the monitor ,then plug the monitor power cord and the
computer cord into grounded electrical outlets.
Place the cable into the specific hook indicated in below figure.
Note:
A certified power supply cord has to be used with this equipment. The
relevant
national installation and/or equipment regulations shall be considered. A
certified
power supply cord not lighter than ordinary polyvinyl chloride flexible
cord
according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2
3G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber
according
to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.
1-5
L
215p
Wide Flat Panel Monitor User’s Guide
