background image

Adjust and Programming 

CONTRAST:  

Adjusts the image brightness in relation to the background. 

BRIGHTNESS:  

Adjusts the overall image and background screen brightness. 

H. POSITION:   

To moves the picture image horizontally left or right. 

H. SIZE:   

To adjust the horizontal size of the image.

 

V. POSITION:   

To moves the picture image vertically. 

V. SIZE:   

To adjust the vertical size of the image.

 

ROTATION: 

(optional)

 

Rotates the entire display clockwise or counter clockwise.

 

PINCUSHION: 

To adjust the curvature of the sides   

TRAPEZOID:  

To adjust the bottom of the screen to be the same as the top. 

PARALLELOGRAM:  

To adjust the tilt of the side. 

  PIN. BALANCE:  

To adjust the curvature of the side. 

ADVANCED SELECT: 

MOIRE ADJUSTMENT: 

The screen image may shake slightly while the moire cancellation 

function is ON. It is normally OFF(H=0,V=0). 

V. MOIRE: 

 

To adjust the vertical moire of the image. 

H. MOIRE:   

To adjust the horizontal moire of the image.

 

CORNER:

 .

(optional)

 

 

Use to adjust the alignment of top and bottom corner   

TOP CORNER:   

To 

adjust

 the top corner of the image. 

BOTTOM CORNER:   

To adjust the bottom corner of the image. 

COLOR SELECT: 

This control adjusts the color temperature of the screen image.9300

°

K and 

6500

°

K are preset by factory. You can not do adjustment. 

9300

°

K:

 Which is bluish white light. 

6500

°

K:

 Which is reddish white light. 

USER: 

You can adjust the individual color gun intensity by yourself. Increase 

or decrease red, green or blue depending upon which is selected. 

 

 

12 

Содержание 6307BTN - E75 - 17" CRT Display






















Отзывы: