Lenovo 6300 Скачать руководство пользователя

Страница: 50 / 51

Chapter

BIOS Update Procedure

Sometimes, you may need to update your BIOS to the latest version. For flexibility
and ease of use, Award Flash Utility updates your BIOS through software, without the
need to remove chassis cover or change any hardware.

Follow the procedure below when you need to update your BIOS:

1. First, you need to have the latest BIOS file and Award Flash Utility (Program name:

AWDFlash.exe) from the manufacturer’s website. If necessary, contact your local
dealer for help.

2. Download these two files into your hard disk. It is strongly recommended to put

these into the same directory (i.e.: C:\utility\flash\).

3. If you are using Windows ME, perform shutdown operations and restart your

computer in MS-DOS mode or command prompt.

4. Change the directory to the location where the BIOS file and Utility are placed. For

example, if the files are located in C:\utility\flash\*.*, type the following command in
DOS prompt:

cd c:\utility\flash

5. Press <Enter> key then, type:

AWDFlash <filename of the BIOS file>

6. Press <Enter> key.

7. Your BIOS is now updated. Reboot the system to have the new BIOS executed.

Содержание 6300



















































Результаты поиска

Содержание 6300

Отзывы:

Похожие инструкции для 6300

Бренды по названию

Популярные бренды

Lenovo 6300, Руководство пользователя

Результаты поиска

Содержание 6300

Отзывы:

Похожие инструкции для 6300

Бренды по названию

Популярные бренды