Lenovo 6241 Скачать руководство пользователя

Страница: 301 / 1990

c. Gently twist the handle on the installation tool clockwise to the closed position and lift the

microprocessor out of the socket.

Step 10. Place the microprocessor on a static-protective surface. Remove the microprocessor from the

installation tool by twisting the handle counterclockwise.

Installation
tool

Microprocessor

Handle

Step 11. If you are instructed to return the microprocessor, follow all packaging instructions, and use any

packaging materials for shipping that are supplied to you. Do not return the microprocessor
installation tool.

Replacing a microprocessor and heat sink

This information provides instructions on how to replace a microprocessor and heat sink.

To replace a microprocessor and heat sink, complete the following steps:

Attention:

When you handle static-sensitive devices, take precautions to avoid damage from static

electricity. For details about handling these devices, see “Handling static-sensitive devices” on page 46.

Notes:

• Use the microprocessor installation tool that came with the new microprocessor kit to remove the

microprocessor from the server.

• Be extremely careful when handling the microprocessor, the microprocessor socket contacts are very

fragile.

• Do not allow the thermal grease on the microprocessor and heat sink to come in contact with anything.

Contact with any surface can compromise the thermal grease and the microprocessor socket.

• Do not touch the microprocessor contacts. Contaminants on the microprocessor contacts, such as oil

from your skin, can cause connection failures between the contacts and the socket.

• Be sure to only install microprocessors that have the same speed, number of cores, and frequency.

• Each microprocessor socket must always contain either a socket cover or a microprocessor and heat

sink.

• Be sure to use only the microprocessor installation tool provided with the new microprocessor to remove

or install the microprocessor. Do not use other tools.

• The microprocessor installation tool has the microprocessor installed on the tool, and might have a

protective cover over the microprocessor. Do not use the tool or remove the cover from the
microprocessor until you are instructed to do so.

• The server supports up to four (per 4U server) Intel Xeon dual-core or quad-core microprocessors (one

microprocessor on each compute book). See

http://www.lenovo.com/serverproven/

for a list of supported

microprocessors.

1. Install the microprocessor:

a. Make sure that the microprocessor socket levers and retainer are in the open position.

Chapter 6

Removing and replacing components

287

Содержание 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 6241

Отзывы:

Похожие инструкции для 6241

Бренды по названию

Популярные бренды

Lenovo 6241, Инструкция по установке и обслуживанию

Результаты поиска

Содержание 6241

Отзывы:

Похожие инструкции для 6241

Бренды по названию

Популярные бренды