Installing the monitor driver in Windows XP
To use the Plug and Play feature in Windows XP,
fi
les should be loaded from the
Reference and Driver CD.
Note
: This section must be completed before continuing with the Windows XP
automatic image setup.
1.
Turn off the computer and all attached devices
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP
4.
Open the
Display Properties
Window by clicking
Start Settings Control
Panel
, and then double-clicking the
Display
icon.
5.
Click the
Setting
tab.
6.
Click the
Advanced
button.
7.
Clink the
Monitor
tab.
8.
Clink the
Properties
button.
9.
Clink the
Drivers
tab.
10.
Open the
Upgrade Device Driver Wizard
window by clicking on
Update
Driver
, and then click
Next
.
Select
Install from a list or Specific location(Advanced),
and then click
Next.
Select
” Do not Search, I will choose the driver to install”,
click
Next.
11.
Insert the Setup CD into the CD driver, then click the
Have Disk
button.
12.
Click on the
Browse
button and navigate to the following directory:
X:\Monitor Drivers\
(where
X
is the drive letter designator for the CD-ROM drive).
13.
Select the "
L2321xwD.inf
" file and click the
Open
button. Click the
OK
button.
14.
Choose
L2321xwD
and click
OK
. The
fi
les will be copied from the CD to
your hard disk drive.
15.
Close all open windows and remove the CD.
16.
Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Pro
fi
les.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve
display quality. Lenovo recommends using either 1920x1080 at a refresh rate of 60
Hz, or 640x480 at a refresh rate of 60Hz.
3-6
L2321x Wide Flat Panel Monitor User’s Guide
Содержание 4014HB6
Страница 1: ......
