Chapter 3. 3-5
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 8, Microsoft
Windows 7, Microsoft Windows Vista.
Installing the monitor driver in Windows 8
To use the Plug and Play feature in Microsoft Windows 8, do the following:
Note:
You must download file from the Reference and Driver CD to use the Plug and Play feature
in Windows 8.
Turn off the computer, all attached devices.
1.
Ensure that the monitor is connected correctly.
2.
Turn on the monitor and then the system unit. Allow your computer to start the Windows 8
3.
operating system.
Open the
4.
Display Properties
window by clicking
Start
,
Control Panel
and
Hardware
and
Sound
icon. and then clicking the
Display
icon.
Click the
5.
Change the display settings
tab.
Click the
6.
Advanced Settings
icon.
Click the
7.
Monitor
tab.
Click the
8.
Properties
button.
Click the
9.
Driver
tab.
Click
10.
Update Driver
, then click
Browse the computer to find the driver program
.
Select
11. .
Pick from the list of device driver program on the computer
.
Click the Have
12.
Disk button
. Click the
Browse
button and navigate to the following directory:
X:\Monitor Drivers
(where X is the drive letter designator for the
CD-ROM
drive).
Select the "
13.
LI2341t Wide�inf
" file and click the
Open
button. Click the
OK
button.
Select
14.
LEN LI2341t Wide
and click
Next
. The files will be copied from the CD to your hard
disk drive.
Close all open windows and remove the CD.
15.
Restart the system. The system will automatically select the maximum refresh rate and
16.
corresponding Color Matching Profiles.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh
rate of 60 Hz.