Lenovo 3200 Series, Руководство по установке, Страница: 63 / 132

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page
45
Setup Requirements
Table 4 and Table 5 provide the requirements for applying NPAR functionality to 8200 and 3200 Series
Adapters installed in host servers within SANs.
Table 4. NPAR Operating System Requirements
Operating Systems Platforms
Linux
• RHEL5.6 and later, x86 and x64
• RHEL6.0 and later, x64 only
• SLES10 SP4 and later, x64 only
• SLES11 SP1 and later, x64 only
Citrix ®
• XenServer
®
6.0 and later
Windows
• Windows Server 2008 SP2, Windows Server 2008 R2 SP1
— Hyper-V
® a
a If a partitioned NIC is configured for use in a Hyper-V network virtualization stack, virtual message queue (VMQ) must be
enabled. To enable VMQ on a management OS with physical network adapters less than 10Gbps, enter the following command
in a command prompt window:
reg add
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMSMP\Parameters /v
BelowTenGigVmqEnabled /t REG_DWORD /d 1 /f
For the latest list of operating systems that support NPAR for QLogic Adapters, please check http://driverdown-
loads.qlogic.com.
Table 5. NPAR Management Tool and Driver Requirements
SW Components Description
Management Tools
QLogic OptionROM Flash image containing firmware and boot code
QLogic QConvergeConsole
GUI/CLI Management tools that can be utilized for NPAR configuration
and management
QLogic Device Windows
Properties Page Can be used for NPAR configuration and management in Win-
dows
Drivers
Adapter drivers NIC, FCoE, and iSCSI drivers
Management tools and drivers are located on the QLogic Web site
http://driverdownloads.qlogic.com.