Hardware Maintenance Manual
36
Setting, changing, and deleting a Administrator password
To set, change, or delete a password, do the following:
Note:
A password can be any combination of up to 16 characters (A- Z, a-z,
and 0-9). For more information, see “Password considerations” on
page 17.
1. Start the Setup Utility program (see “Starting the Setup Utility program”
on page 16).
2. From the Setup Utility program menu, select
Security
.
3. Select
Set Administrator Password
and press Enter.
4. The password dialog box will be displayed. Type the new password,
and press Enter.
5. when prompted to confirm the password, type the password again. If
you type the password correctly, the password will be installed.
To delete a previously set Administrator password, do the following :
Note:
When prompted for a password, you must type your Administrator
password.
1. From the Setup Utility program menu, select
Change Supervisor
Password
and press Enter.
2. when you type the Administrator password. a message will display
that
Enter New Password
. Press Enter and a message will display
that indicates the password has been disabled. After that, the power-
on password will be disabled too if a power-on password has been
installed.
3. Press any key to contine.
Power-on Password
When a Power-On Password is set, you cannot start the Setup Utility
program until a valid password is typed from the keyboard.
You should set a power-on password after you set the administrator
password. If you didn’t setup the administrator password but only set the
power-on password, you cannot change any configuration settings.
Setting, changing, and deleting a power-on password
To set, change, or delete a power-on password, do the following:
Note:
A password can be any combination of up to 16 characters(A-Z, a-z,
and 0-9).
1. Start the Setup Utility program (See ”Starting the Setup Utility program”.)
Содержание 3000 H220
Страница 58: ...Chapter 7 Replacing hardware 55 ...
