Chapter 2. Using Your Computer
29
Changing or Removing the User Password
To change the password, do the following:
1
Select
Set User Password
, and press the
Enter
key. The Set User
Password window opens.
2
Type the correct password in the
Enter Current Password
field. Press
Enter
key once to move to the
Enter New Password
field, then type in
a new user password in.
3
Press the
Enter
key once to move to the
Confirm New Password
field.
Retype the password you just entered to verify it.
4
Commit your password to memory, and press the
Enter
key.
To remove the password, do the following:
1
Select
Set User Password
, and press the
Enter
key.
2
Type the correct user password in
Enter Current Password
, and finally
press the
Enter
key thrice.
Note
:
Make sure
Password on boot
is set to
Enabled
if you desire password
protection at power on.
Lenovo G230 UG V1.0_en.book Page 29 Monday, July 28, 2008 7:29 PM