To use the Plug and Play feature in Windows XP, files should be loaded from the
Reference and Driver CD
.
Note: This section must be completed before continuing with the Windows XP
automatic image setup.
1. Turn off the computer and all a�ached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP.
4. Open the
Display Properties
window by clicking
Start Se�ings Control
Panel
, and then double-clicking the
Display
icon.
5. Click the
Se�ings
tab.
6. Click the
Advanced
bu�on.
7. Click the
Monitor
tab.
8. Click the
Properties
bu�on.
9. Click the
Drivers
tab.
10. Open the
Hardware Update Wizard
window by clicking on
Update Driver
,
and then click
Next
.
11. Select
Install from a list or Specific location(Advanced)
, and then click
Next
.
12. Insert the Setup CD into the CD drive, then click the Have Disk bu�on.
13. Click
OK
.
14. Ensure that the CD drive le�er is selected.
15. Choose
L1
951pwD
and click
OK
. The files will be copied
from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve
display quality. Lenovo recommends using either 1
440
x
900
at a refresh rate of 60
Hz, or 640 x 480 at a refresh rate of 60 Hz.
Chapter 3. Reference information
3-5
Installing the monitor driver in Windows
XP
L194 Wide Flat Panel Monitor User’s Guide
Содержание 2448HB6
Страница 1: ... L1951p Wide ...
