Lenovo 10A2, Руководство пользователя, Страница: 93 / 186

Installing the secondary hard disk drive
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
To install the secondary hard disk drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See “Removing the computer cover” on page 42.
3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 42.
4. Press the retaining clip
1
in the direction as shown and pivot the drive bay assembly upward at the
same time.
Figure 74. Pivoting the drive bay assembly upward
Chapter 5
.
Installing or replacing hardware
81