DS22-824x(04.05)
8
Bauer
Operating software
Technological cam-plate function
•
Curve modification without set-up times
•
Reduced jerking during movements due to harmonic
and cycloid curve shapes
•
Engagement and disengagement of the slave axis
•
Virtual master function:
permits displacement of the curve drive
•
Dynamic adaptation of curve shapes:
lengthening, shortening, etc.
BB2100K operating software
(curve editor)
The BB2100K operating software can be used to define
the desired curve characteristics on a PC. The PC is
connected to the MotionCard via the serial interface. The
parameter editor for the servo-converter LD 2000 can also
be started out of this program. Other program
characteristics:
−
System parameter editor
−
Oscilloscope function
−
Setting of range signals via mouse-click
−
Individual programming due to free editing of program
texts
−
Assistance with the analysis of curves (position,
speed, acceleration and torque)
−
Graphics-aided editing of parameters for special
applications (e.g. rotating cutter and flying saw)
Available on our homepage
www.lenord.de
:
bb2100k.exe
Curve editor BB2100K for operation and
monitoring of servo-converter LD 2000
with cam-plate module.
ld2000.exe
Start-up software for servo-converter
LogiDrive LD 2000
within the scope of supply
