Lenofocus LRD03, Руководство пользователя

Страница: 17 / 28

16
F.
NOTE
1.
When the camera is connected successfully, LED indicator changes to
blue solid on.
2.
Low battery causes connection failed. Charge, reset and set up again.
3.
If connection failed, check if WiFi name and password is correct; put your
mobile device and camera close to your router, and then reset the camera
and set up again.
4.
If the app homepage shows the camera is offline, check if the camera is
powered on, and refresh the page by clicking the Refresh icon in the upper
right corner (For Android device); or restart the camera (For all devices).
G.
Remote Mode (iOS Devices: iPhone, iPad)
Make sure 2.4G WiFi signal is available before operation. This WiFi camera
only supports 2.4G WiFi Network. Open the JXLCAM app before the following
operations.