background image

 

 

 

Preface 

For correct installation and operation, please read all instructions carefully. Before reading the 

instructions, please be aware of the following items: 

  If not abide them strictly, it may cause severe damage to the unit or the people. 

 

If not abide them strictly, it may cause slight or medium damage to the unit or the people. 

 

This sign indicates that the items must be prohibited. Improper operation may cause 
severe damage or death to people. 

 

This sign indicates that the items must be observed. Improper operation may cause 
damage to people or property. 

 

 

(1) Instructions for installation and use of this product are provided by the manufacturer.   
(2) Installation must be performed in accordance with the requirements of NEC and CEC by authorized personnel only. 
(3) For the safe operation of this unit, please read and follow the instructions carefully. 
(4) During operation, total capacity of indoor units should not exceed the total capacity of outdoor units. Otherwise, 

poor effect of cooling or heating may result. 

(5) Direct operators or maintainers should well keep this manual. 
(6) If this unit fails to operate normally, please contact our service center as soon as possible and provide the following 

information:     

1) Content on the nameplate (model number, cooling capacity, production code, ex-factory date.) 
2) Malfunction details (before and after the malfunction occurs.) 

(7) Each unit has been strictly tested and proved to be qualified before ex-factory. In order to prevent units from being 

damaged or operating normally because of improper disassembly, please do not disassemble the unit by yourself. 
If you need to disassemble and check units, please contact our service center. We will send specialists to guide the 
disassembly. 

(8) Installation must be performed in accordance with the requirements of NEC and CEC by authorized personnel only. 

User Notice 

This appliance can be used by children aged from 8 years and above and persons with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given 
supervision or instruction concerning use of the appliance in a safe way and understand the hazards 

involved. Children shall not play with the appliance. Cleaning and user maintenance shall 
not be made by children without supervision. 
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such 
waste separately for special treatment is necessary.

Содержание VRF VE8K007C432P





























Отзывы: