3
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
4.
Light the appliance following instrutions on lighting label in control
compartment or see lighting instructions in
Homeowner’s Care and
Operation Manual
provided with appliance.
Ensure that the latch(es)
below the door are engaged with the door’s vee-fl ange and fully closed
before operating the fi replace.
5. Install Grilles
(see
Figure 7) -
Remove the grilles from packaging.
Position the grilles so that the hook catches on the back of grilles slide
into corresponding slots on fi replace
.
Magnet
Using a phillips screwdriver, remove the con-
trol compartment magnet (left side only).
Screw
Figure 6 - Remove Magnet
Control Compartment
Figure 7 - Side View of Grilles
Lower Grille
Upper Grille
Knob
Hook
Hook
2.
If fi replace has a modesty panel with side locating tabs as shown in
Figure 5
, the left tab will require the following modifcation:
a.
Remove the modesty panel from the control compartment (see
instructions in Homeowners Care and Operation Manual).
b.
Using cutting pliers, cut 1/2” off the end of the left top locating tab
on the modesty panel only as shown in
Figure 5
.
c.
Reinstall modesty panel in fi replace control compartment.
Left Locating Tab on Modesty Panel
Modesty Panel
Modesty Panel
Locating Tab
1/2”
Locating Tab
Modesty Panel
Figure 5 - Cut off End of Left Locating Tab
Cut off end of tab.
3. Remove Magnet in the Control Compartment (if necessary)
per
instructions in
Figure 6.
Left Locating
Tab
