9
• Dry – System removes humidity
according to preset conditions (fan
speed and setpoint temperature, not
a humidistat sensor). Cannot adjust
fan speed.
• Heat – System operates in heating
mode.
• Fan – Fan only, no heating or cooling.
To Set (or change) the Room
Temperature Setting (Set )Point)
Press the up arrow & down arrow buttons
to adjust the setpoint.
Dry mode
1. Press the Power button, an LED
light on the indoor unit displays.
2. Press the Mode button to select Dry.
3. Adjust the temperature setpoint
using up and down arrow buttons.
NOTE:
Fan speed is not adjustable.
Timer Operation
Timer ON and Timer OFF are used to
turn on and turn off the indoor unit at
selected intervals.
Timer ON operation
1. Press the Timer ON button. The
Timer on icon, the last auto-on time,
and “h” will display.
2. Press the Timer ON button again to
set the amount of time before the
indoor unit begins operation. Each
press will increase the time in half
hour increments until 10 hours, then
the increment becomes 1 hour.
Timer OFF Operation
1. Press the Timer OFF button. The
Timer off icon, the last auto-off time,
and “h” will display.
2. Press the Timer OFF button again
to set the amount of time before the
indoor unit stops operation. Each
press will increase the time in half
hour increments until 10 hours, then
the increment becomes 1 hour.
Modify Timer ON/OFF Settings
1. Press either the Timer ON button or
the Timer OFF button to modify that
setting.
2. Continue to press the Timer ON or
Timer OFF button until the display
shows the new time. Each press
will increase the time in half hour
increments until 10 hours, then the
increment becomes 1 hour.
3. Set the timer to 0.0 to turn off timed
operation.
