Lennox eCOMFORT R32 GAC 035S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 88

• 3 • Installation manual / eCOMFORT R32-MIL166E-0222 - 09/2022
IMPORTANT GENERAL INSTRUCTIONS
You must read and be familiar with this operating manual prior to commission the chiller.
Please closely follow the instructions.
We would like to stress the importance of training with respect to the correct handling of the chiller.
Please consult LENNOX on the options available in this field.
It is important that this manual is stored in a permanent location in the vicinity of the chiller.
This manual contains important instructions regarding the commissioning of the chiller. It also includes important instructions to prevent
personal injury and damage to the machine during operation. Furthermore, in order to promote fault-free operation of the chiller,
maintenance information has been included.
Please do not hesitate to contact one of our employees should you require further information on specific chiller subjects. Order related
documentation will be forwarded under separate cover.
This documentation consists of:
• EU declaration.
• Operating manual for control system.
•
Installation operating manual.
• Wiring diagram.
• Refrigerant flow diagram.
• Units detail are given on unit nameplate.
The data published in this manual is based on the most recent information available. It is supplied conditional to later modifications.
We reserve the right to modify the construction and/or design of our chillers, at any time, without prior notification or obligation to adapt
previous supplies accordingly..
Any work on the Chiller should be carried out by trained and licensed competent technician. The
following risks are present on the unit:
• Risk of electrical shock.
• Risk of injury from rotating parts.
•
Risk of injury from sharp edges and heavy weight.
• Risk of injury from high pressure gas.
• Risk of injury from slightly flammable refrigerant.
• Risk of injury from high and low temperatures components.
It is expected that all works on equipment be carried out in accordance with all local standards and
norms. It is expected that all works are carried out with good working practices.
Inspections and requalification according to Pressure Equipment Directive (PED) must follow the local
regulations where the unit is installed.
The refrigerating system is designed for a working life of at least 10 years if the safety and maintenance instructions are strictly
respected.
The equipment can be renewed in its lifespan if the periodic requalification certificate is validated by the expert (Authorized body or
DREAL for France)
INTRODUCTION
We remind you that these instructions must be followed for operation, maintenance, repair and decommissioning of the
product. Failure to follow these instructions will result in the offender assuming the manufacturer's responsibilities.