Lennox ECOLEAN EAC 0251SM, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 40

25
416
1195
101
848
31
101
848
246
980
416
149
790
605
1195
992
105
105
992
56
992
902
405
952
125
125
952
96
145
162,5
1992,5
1195
149
416
246
101
1195
790
62
101
416
101
1195
1209
790
416
149
1695
1140
1170
1140
1695
106
324
104
600
101
416
1420
416
62
0251 to 0431 MODELS
0472 to 0812 MODELS 1003 to 1403 MODELS
1604 MODEL 1804 MODEL
Square discharge
duct 848x848
Inlet plenum
Square discharge duct
848x848
Inlet plenum
Inlet plenum
Square discharge
duct 992x992
Square discharge
duct 992x992
Square discharge
duct 992x1992,5
1.10.- AVAILABLE OPTIONS
1.- GENERAL CHARACTERISTICS
1.10.6.- OTHER OPTIONS
COIL PROTECTION GUARDS
The condenser coil protection grill prevents light damage to the coil when shipping and when installed. It cannot protect against very heavy impacts.
COMPRESSOR NOISE INSULATION JACKET
Each compressor is fitted with a compressor acoustic jacket this provides attenuation of the compressor noise that radiates from the unit when in operation.
ANTI-VIBRATION
To install under the unit, to avoid transmission of vibrations, to the floor where unit is installed, while unit is operating.
Two different type: rubber or prings anti-vibrations (according to models).
INLET PLENUM (models from 0251 to 1403 only)
It is a accessory for adapting the condenser air intake to accept a duct.
SQUARE DISCHARGE DUCT
It is formed by 1 or 2 square frames, for adapting discharge air from the unit to a square duct.
AUXILIAR DRIP TRAY (Only available for heat pump units with FP1/FP2 option)
Heat pump units during defrost cycle produce a lot of quantity of water. You can use an auxiliary drip tray under the unit in order to get all the
drefrost water and take it where you decided.