![Lennox Hearth Products EKITE DES-BS Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/lennox-hearth-products/ekite-des-bs/ekite-des-bs_installation-instructions_1878310001.webp)
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
NOTA: LOS DIAGRAMAS Y LAS ILUSTRACIONES NO ESTAN A ESCALA.
REMARQUE : LES SCHÉMAS ET LES ILLUSTRATIONS NE SONT PAS À L’ÉCHELLE.
KIT CONTENTS / INCLUS DANS LE KIT / CONTENIDO EN EL JUEGO
1 ea. Screen panel / panneau grillagé / panel de malla
1 ea. Language labels / Étiquette Française ou espagnol /
Etiquetas
del idioma
1 ea. Instruction sheet / Feuille d’instruction / Hoja de instrucciones
TOOLS REQUIRED / OUTILS NÉCESSAIRES / HERRAMIENTAS
REQUERIDAS
5/32" Allen Wrench / Clé à six pans 5/32’’ / 5/32" Llave Allen
GENERAL INFORMATION
If you encounter any problems, need clarification of these instructions or
are not qualified to properly install this kit, contact your local distributor
or dealer.
Read this instruction sheet in its entirety before beginning the installa-
tion.
All of these parts may scratch and bend, great care should be used
in handling them.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
TURN OFF THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
HEARTH PRODUCTS
KITS AND ACCESSORIES
BARRIER SCREEN KITS
P/N 506033-26
Rev. A, 03/200
INSTALLATION INSTRUCTIONS
Step .
Remove the barrier screen from the packaging.
Step 2.
If an accessory face is installed on the unit, it must be removed
from the unit before proceeding with the barrier screen installa-
tion. For detailed instructions on removing a specific accessory
face, please refer to the instruction sheet that was supplied with
the face.
Step 3.
You must first remove the glass door to install the barrier screen.
To remove the glass door, use an allen wrench to remove the upper
two screws and loosen the lower three screws (see Figures 2,
3 and 4). Lift the glass door up and off the lower three screws.
Be careful not to damage or scratch the glass while handling. Do
not operate the insert with the glass removed.
Step 4.
Place the barrier screen over the glass door and reverse the glass
door removal steps to reinstall. See Figures 2, 3 and 4.
Step 5.
Reinstall accessory face assembly.
Step 6
. This screen is provided with a warning label in English, located
on the bottom left front corner. If the primary language of the
home is other than English, apply one of the provided (French
or Spanish) alternate language labels over the English language
label. See Figure 5.
INSTALLATION INSTRUCTIONS FOR BARRIER SCREEN PANEL KITS
INSTRUCTIONS D’INSTALLATION POUR ENSEMBLES PANNEAUX GRILLAGÉS
INSTRUCCIONES DE INSTALACIÓN PARA LOS JUEGOS DE PANELES DE MALLA BARRERA
Figure / Figura 1
Two Mounts On Top
Deux attaches sur le haut
Dos Monturas En Lado Superior
Three Mounts On Bottom
Trois attaches sur le bas
Tres Monturas En Lado Inferior
BARRIER SCREEN PANEL KITS
ENSEMBLES PANNEAUX GRILLAGÉS
JUEGOS DE PANELES DE MALLA BARRERA
Cat. No.
No. Cat.
Cat. No.
Model No.
No. Modèle
Modelo No.
Models Where Used
Utilisè Sur Modèles
Modelos Donde Se Usa
H7725
DES-BS
Designer™
Top
Dessus
Lado Superior
Back View
Vue de dos
Vista Trasera
WARNING
Hot fireplace inserts will cause severe burns. Do
not touch glass, metal frame or screen until cooled.
Never allow children to touch these areas.
f i r e - p a r t s . c o m