HDMI Extender Over Network Cable
User's manual
IMPORTANT SAFETY INSTRUCTIONS:
Do not mix up HDMI to RJ45 to HDMI sender and RJ45 to HDMI
receiver before installation.
Do not hot plug when it is working.
Use DC5V power supply only. Make sure specification matched if using
1. PACKAGE CONTENTS
HDMI to LAN sender TX*1pcs LAN to HDMI receiver RX*1pcs
DC5V1A*2pcs User's manual*1pcs
2.INSTALLATION REQUIREMENTS
2.1.HDMI source device(computer graphics card,DVD,PS3,HD monitoring
equipment etc.
2.2. HDMI display device like SDTV,HDTV,projector with HDMI port.
2.3.UTP/STP cat6/cat6A/cat7 cable
2.4.Follow standard IEEE-568B
2.5.Transmit length more than 40m by CAT6 cable or higher level cable.
3.INTERFACES
3.1 HDMI to RJ45.
①
DC5V power input
②
HDMI signal input
③
RESET
④
RJ45 signal output
⑤
HDMI signal indicator led. It lights on all the time with HDMI signal
input,flashes with no signal input.
3.2 RJ45 to HDMI
①
Network cable length adjust button, There are total 12 levels and can be
switched cycilically. Supports memory function and needs no setting after
power off.
②
RJ45 signal input
③
The first level network cable length LED,if you need the third level
network cable length,please press the button"LENGTH"twice when this
LED lights on and so on.
④
Connection status indicator led. It lights on all the time with HDMI signal
transmission,flashes with no signal transmission.
⑤
DC5V power input
⑥
HDMI signal output
