Lenhardt & Wagner LW 150 ES Скачать руководство пользователя страница 144

Страница: 144 / 187

Version: 10.09.2021

O I L P U M P

Maintenance and Service

Oil Sieve Change

Oil sieve change as follows:

• Loosen cover screws (Fig.1 / 4 pcs).

• Remove the cover, the cover gasket and the oil sieve.

• Clean the oil sieve with petroleum-ether or replace the defective oil sieve.

• Replace the gaskets.

• Soak the gaskets with oil before placing (respect mounting direction).

• Be sure to position the arrow from the new oil sieve opposite to inlet and return ports of the

pump (see Fig.2).

• Remount the cover with the 4 cover screws. Tightening torque: 4.5 - 8 N.

The oil sieve change is now completed.

Maintenance intervals

• We recommend cleaning or replacing the oil sieve every 1,000 working hours.

• Service Kit oil pump (002569). Consists of: 000798—Oil sieve + 000672—oil pump cover gasket.

Fig. 1

Fig. 2

D - 18

LW 150 - 200 ES

Содержание LW 150 ES




























































































































































































Результаты поиска

Содержание LW 150 ES

Отзывы:

Похожие инструкции для LW 150 ES

Бренды по названию

Популярные бренды

Lenhardt & Wagner LW 150 ES, Руководство по эксплуатации

Результаты поиска

Содержание LW 150 ES

Отзывы:

Похожие инструкции для LW 150 ES

Бренды по названию

Популярные бренды