7
6
Thermostat with display
User Manual
3 Using the thermostat
3.1 MyHOME temperature control system probe (with central unit)
If configured to operate only as probe part of a MyHOME temperature system, the thermostat
receives the main set-points from the central unit (temperature set-point, summer/winter set-
point, etc.). However, it is locally still possible to switch from normal mode to Comfort, ECO,
Antifreeze/Thermal protection modes.
The setting of a manual temperature set-point is possible, but it is only temporary, as it will only
last until the next set-point change sent by the central unit.
Operating mode
Press the MODE key once or more, to select the
desired mode
The symbol of the new mode appears and the set
temperature flashes (thermometer symbol off).
Use
+
and
–
to change the set-point.).
After a few seconds the new set-point is saved, and
the measured temperature appears (thermometer
symbol on).
Factory settings
Heating
Cooling
Comfort
21 °C
25 °C
Eco
18 °C
28 °C
Antifreeze
7 °C
Thermal protection
35 °C