Lenel m3000, Руководство по установке, Страница: 37 / 118

M3000 Installation Guide
37
CHAPTER 5
Reader Processing Boards
The M3000 controller supports the following types of reader processing boards:
•
2RP Board on page 37
•
2SRP Board on page 49
•
8RP Board on page 64
Only one reader board type can be used at one time, for a maximum of:
•
Four (4) 2RP boards (for support of up to eight (8) readers),
•
Four (4) 2SRP boards (for support of up to eight (8) supervised readers), or
•
Two (2) 8RP boards (for support of up to 16 readers).
2RP Board
Each 2RP reader board provides:
•
Two (2) reader ports,
•
Four (4) unsupervised DIs with
–
two (2) door alarms, and
–
two (2) REX inputs,
•
Two (2) reader LED outputs,
•
Two (2) door strike DO relays,
•
Two (2) auxiliary DO relays, and
•
Two (2) alarm shunt relays used to shunt out external alarm inputs.
Please note the following:
•
Each 2RP board is limited to only one (1) type of reader technology: Wiegand, Strobed, F/2F, or
Supervised F/2F.
•
Both readers connected to the board must use the same voltage.
•
In Supervised F/2F mode, the exit request and door alarm contact wiring is terminated at the
reader.
•
If alarm points are not available on the reader, use alarm points on the controller.