RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1 . Insert the cassette tape.
2 . Press the PAUSE button.
PAUSE
4 . Prepare to play the source to be recorded and play it.
Recording from the radio
Recording from a CD
FUNCTION
CD
FUNCTION
RADIO
PLAY THE CD TUNE INTO A STATION
3 . Press the RECORD button.
RECORD
5 . Press the PAUSE button.
TO STOP RECORDING
Press the STOP / EJECT button.
TO INTERRUPT RECORDING
Press the PAUSE button.
To resume recording, press the PAUSE button again.
TO ERASE A RECORDED TAPE
1. Set the FUNCTION selector to TAPE.
2. Insert a tape with the side you want to erase facing you.
3. Press the RECORD button to start erasing.
GB 5
PAUSE
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume play, press the PAUSE button again.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/EJECT
button to stop winding at the desired position.
PLAY
3 . Press the PLAY button.
TAPE PLAYBACK
1 . Set to TAPE
FUNCTION
TAPE
2 . Insert the cassette.
Unit will be automatically off
after 15 mins without further operation.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping
with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem occurs,
disconnect the AC power cord and remove the batteries. Wait at least 5
seconds, then reconnect the AC power cord or reinstall the batteries.
WARNING
Should the CD door be opened before the reading of the CD completed, a
jamming noise may occur. This is resolved by closing the CD door.
CLEANING THE TAPE HEADS
To maintain optimum sound quality, clean the playback/
record heads ( a ) ,erasure head (b), pinch rollers (c),
and capstans (d) regularly (every 10 hours of use ). Use
a cotton swab lightly moistened with cleaning fluid or
denatured alcohol.
c d a b
CLEANING CD
If the CD skips or will not play , the disc may need
cleaning. Before playing, wipe the disc
from the centre out with a
cleaning cloth. After playing,
store the disc in its case.
MAINTENANCE
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow several
times on the lens and remove the dust
with the brush. Finger prints may be
removed with a cotton swab moistened
with alcohol.
CD16MP3-LENCO-FM-ENG-TCD20ACD RED + TEMP.indd 7
18/10/2017 11:25:35
