LENCO SCD-580SI, Руководство пользователя

Страница: 14 / 78

14
FLAT CLASSIC ROCK POP JAZZ
Due to the ErP Stage 2 requirements (see below) for power saving measures, a unit which is connected to the
mains power will switch itself to standby mode automatically if no music has been playing for over 15 minutes.
If your unit switches off regularly, this is no defect
Power supply adaptor (For EU only)
Power supply: DC 12V 1.5A, 18W
Information Value and and precision
Manufacturers name or trade mark, commercial
registration and address Shenzhen Guijin
Technology Co., Ltd
Model Identifier AK18WG
-
1200150V
Input voltage 100
-
240 Volts
Input AC frequency 50
-
60 Hz
Output voltage DC12V
Output current 1.5A
Output Power 18W
Average active efficiency 75%
Efficiency at low load (10%) 50%
No load Power consumption 0.05W
GUARANTEE
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after
the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non
-
official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will
be voided.
DISCLAIMER
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and
pictures in this documentation may differ slightly from your particular situation. All items described in this guide for
illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the
description made in this manual.
DISPOSAL OF THE OLD DEVICE
This symbol indicates that the relevant electrical product or battery should not be disposed of as general
household waste in Europe. To ensure the correct waste treatment of the product and battery, please
dispose them in accordance to any applicable local laws of requirement for disposal of electrical
equipment or batteries. In so doing, you will help to conserve natural resources and improve standards
of environmental protection in treatment and disposal of electrical waste (Waste Electrical and
Electronic Equipment Directive).